Terumo BCT T-RAC II, Инструкция по эксплуатации

Страница: 92 / 146

Page 22 of 76
5.10.1 TOMEs Mobile Collection Tool (MCT)
TOMEs Mobile Collection Tool (MCT) is a program which can be downloaded from TOMEs
(starting from TOMEs version 6.1). It can be run from a computer without installation. The
purpose of TOMEs Mobile Collection Tool is to use it on mobile donation sites. A small mobile
network is set up with a pc running the TOMEs Mobile Collection Tool. T-RAC II devices can
connect to the PC just as they can connect to TOMEs. The tool then saves all data from all
connected T-RAC II devices on the computer running the tool. Alternatively, data from T-
RAC II USB flash drives can be imported. When the computer reconnects with the TOMEs
network, the tool automatically synchronizes all saved data to TOMEs.
[NOTE] Please refer to the TOMEs software module IFU for more information.
5.11 USB flash drive
The USB flash drive offers a means of data transfer to and from TOMEs or to TOMEs Mobile
Collection Tool without the need for a TOMEs/MCT network. The drive can be inserted in
the USB slot at the front of T-RAC II when T-RAC II is switched off.
Two types of data can be transferred with the drive:
• Donation data from T-RAC II to TOMEs or TOMEs Mobile Collection Tool. This is explained
below.
• Programs from T-RAC II to other T-RAC II devices, to TOMEs and vice versa. See chapter
7.2.
Copying donation data from T-RAC II
T-RAC II features an internal memory to temporarily save donation data (information from
the blood collection). When a USB drive is connected, all donation data present in the T-
RAC II device are automatically copied to the USB drive if the device is not connected to
the network. Also, after a new donation is performed on T-RAC II, its donation data will be
saved to the USB flash drive. The USB flash drive may only be inserted or removed from
T-RAC II when T-RAC II is switched off. Data which is copied to the drive, is automatically
erased from the internal memory of T-RAC II. Terumo BCT suggests two ways of using the
USB drive:
• One USB flash drive for all T-RAC II devices
When donations on all devices are finished, the USB drive is inserted one by one on
each T-RAC II. All donation data will be on one stick, making it easier to copy the data
to TOMEs or TOMEs Mobile Collection Tool.
• One USB flash drive per T-RAC II
In each T-RAC II, a USB drive is inserted. In this way, all drives can be collected at the
end of all donations. This makes it easier to copy data from the T-RAC II devices to the
USB drive.
The status of the USB flash drive can be monitored on the touch screen:
• USB-stick is connected and all data is sent to the USB drive. If this icon blinks, this
means that data is being sent to the drive.
• USB-stick is disconnected or there is a problem. If this icon blinks, the internal T-
RAC II memory is full.