Terumo BCT T-RAC II, Инструкция по эксплуатации

Страница: 105 / 146

Page 35 of 76
[NOTE] Both 2METOMES / 8METOMESHW or 2METOMEsINST and (2METOMESTRA01
/ 2METOMESTRA05 / 2METOMESTRA10 are needed in order to use events on T-RAC
II. Information about the configuration of events can be found in the help-file of the
T-RAC II TOMEs software module.
Events are always shown on the touch screen as follows:
This arrow allows to go to the
previous event and change it.
When doing this, only the latest
result will be saved.
List of consecutive events. The
current event is shown on a
white background. The results
of previous events are shown.
Window with the contents of the
current event. What is shown
depends on the type of event
and the event’s configuration.
This arrow allows to skip an
event and move on to the next
one. This button is only present
at events which can be skipped
(configured on TOMEs).
Depending on the event type and its settings, the user can manually give input on an
event by using an on-screen keyboard. It is possible to enter the characters of a
barcode or to type a small message. The number of characters is limited to 25. A
stylus may facilitate the typing. To reach the keyboard, press .