Terumo BCT T-RAC II, Инструкция по эксплуатации

Страница: 125 / 146

Page 55 of 76
Enable LAN
Yes / No Default: Yes
Yes: Ethernet is activated.
No: Ethernet is not activated. None of the features requiring a network
connection (to TOMEs) will work. The network status icon is shown as
.
It is possible to quickly change this setting as well from the LAN status screen.
In order to do so, press the Ethernet status icon .
On T-RAC II Wifi, disabling the LAN functionality will also switch off the internal
wifi module, saving power.
Left / right
Off / Ask / Left / Rght Default: Off
Off: The device doesn’t send information towards TOMEs whether the
device is set-up for donation with left or right arm.
Ask: After every startup of T-RAC II, the device will ask on the idle screen
whether the device is set-up for donation with left or right arm. This
information will be sent to TOMEs and can be viewed in the device
status screen on TOMEs for easier assignation of donors to the
donation beds.
Left: The device will send information to TOMEs that the device is set-up
for donation with left arm.
Rght: The device will send information to TOMEs that the device is set-up
for donation with right arm.
[NOTE] This setting requires an active network connection to work.
7.2.2 Program flow
On screen 5, the order of the events can be viewed. This program flow can only be
changed on TOMEs.