Terumo BCT T-RAC II, Инструкция по эксплуатации

Страница: 84 / 146

Page 14 of 76
After pushing the clamp head backwards after tube
insertion (see step 2 in chapter 5.2) and then
releasing it, the clamp will change from the open to
the locked state. This facilitates handling because it
allows the user to feel immediately whether the
tube is correctly locked in place.
To remove the clamp in case of loss of power:
Make sure the device is switched-off.
Rotate the clamp head 20° counter clockwise.
Pull-up the clamp head.
The tube can now be removed out of the clamp
head.
Make sure that the inner black piece (in the center
of this top view) does not rotate.
Do not switch-on T-RAC II while the clamp head is
removed.