TEMA TELECOMUNICAZIONI SRL
T11-T12 Multifunction Automated Attendant
MAS-T11-T12-rev03-EN
Pagina 9 di 38
4 TECHNICAL
SPECIFICATIONS
Technology
Microprocessor, audio digital synthesis, CMOS, SMD e standard circuits.
Automated Attendant Operating mode
4 modes with a different programmable number of rings. Message
remotely recordable and always played from the beginning.
Call
release
Programmable release tones. Frequency near 425 Hz
Outgoing Dialing
DTMF 0,1,2,3,4,5,6,7,8,9, A,B,C,D, *, #. Up to 3 digit for extensions.
Digit Detection
DTMF 0,1,2,3,4,5,6,7,8,9, A,B,C,D, *, #, sens. -28dBm
Main
currents
22....50mA, line current detection circuit 10....60mA
Ring detection
15...90Vac, 20...60Hz Ring impedance > 10.000 Ohm
Programming
By call on prepared telephone line and password from PC
Basic unit configuration
T11 one port, T12 two analog ports
Music source
Digital static storage
Mess. on volatile storage
Up to 4 messages. From 1.14 firmware version, T11S/T12 can triplicate the
length of recordable messages renouncing mailbox service (see Section
10.1)
Guide messages
Pre-recorded bilingual vocal guides
Music on Hold Output
It
connects optional music source T7005 board to predisposed PBX music
on hold input
Operating mode switching
Depending on the time and system schedule, the unit answers external calls
with 4 opening greeting: Day, Night, Festivity, Holiday modes. Switching can
be performed either manually
simply calling one of the lines connected
to the unit or automatically using an external timer or diverter.
Alarm telephone dialer
Monitoring circuits for 2 alarm contacts that, if enabled triggers the function of
notifying two different telephone numbers, one per alarm, with the possibility
of automatic recall until silenced by assigned personnel with the appropriate
password, or upon the expiration of the specified attempts.
Remote control relay contact
Output circuit of a contact with enabling memory to protect against possible
failure of remote-controllable network by telephone call with appropriate
password protecting the function. For small, low-voltage electrical loads do
not exceed 50 VAC, 200 mA for safety reasons.
Connectors
Standard RJ
connectors
Answering machine
Up to 16 recordable messages of 30 seconds can be stored in the Answering
Machine. The length and number of messages can be modified. The unit
automatically notifies the user of new messages by calling a user-defined
number (that can be modified by entering in configuration mode.
Power
Supply
Power supply adapter 220 VAC, 50 Hz, 7 VA, 24 VDC. Model T7024
Dimension / Weight
40 x 130 x 180 mm (H x L x P). Weight 600 gr. with T7024 power supply and
cables included. Smart case. Unit can be wall mounted by using two
rawplugs.
4.1
Accessories Provided With The Basic T11/T12 System
We recommend leaving all materials not used at the time of installation and the documentation together with
the system so that it can always be found in case checks or future regulations make it necessary.
When the installation is finished, it’s necessary to perform an operating mode test for each line, switching the
system to night mode in order
to verify all basic opening greeting stored in the unit.
Facilities include:
No. 1 DIN 6-pin plug
No. 1 System Manual (this one)
No. 1 T7024 power supply
No. 2 Plug-plug telephone cables
