Teltonika FM6320, Руководство пользователя

Страница: 130 / 139

130
Then FM6320 must be configured. Both fuel level and fuel temperature has to be set up by
configurator’s I/O menu (see Figure ):
Figure 73 FM6320 I/O Configuration
18
GPRS COMMANDS
It is possible to send commands to FM6320 using GPRS. When FM6320 sends records
periodically to a server, a message could be sent from the server and FM6320 will reply to it.
FM6320 has to be connected to the server in order to receive commands.
Command Description
#GET DATAORDER Get info about records sorting parameter
#SET DATAORDERX=Y Set records sorting parameter, X – profile, Y – value (0/1).
#GET RECTO Get info about records refresh timeout parameter
#SET RECTO=X Set records refresh parameter, X = records refresh timeout
#GET VERSION Receive firmware version
#GET NETWORK Get GSM operator to which device is connected
#GET IMSI Get IMSI of the device
#GET OUT Get DOUT values
#DO REPORT Save a record
#DO RESET=XXX Reset FM6320 or GPS module, XXX – FM5X or GPS
#GET ROAMINGX=Y Get operator from the list of a certain profile, X – profile, Y – operator
number in a list
#SET ROAMINGX=Y,Z Set operator to the list of a certain profile, X – profile, Y – operator
number in a list, Z – operator code
#GET REMIPX Get IP and port number from the configuration of a certain profile, X –
profile
#SET REMIPX=Y:Z Set IP and port number to the configuration of a certain profile, X – profile
no, Y – IP or domain, Z – port number
#GET AUPX Get APN, user login and password from the configuration of a certain
profile, X – profile
#SET AUPX=Y,Z,W Set APN, user login and password to the configuration of a certain profile,
X – profile, Y – APN, Z –, user login W - password
#GET REPRTX Get MinPeriod from the configuration of a certain profile, X – profile