Teltonika FM6320, Руководство пользователя, Страница: 108 / 139

108
Accelerator Override 01001b—used to indicate that the PTO governor is active but for the
present time the engine is controlled by a large driver’s demand.
Preprogrammed PTO Governor Set Speed 1 01010b—used to indicate that the PTO device is
establishing a first preprogrammed PTO governor set speed (user programmable) as the current
operating speed.
Preprogrammed PTO Governor Set Speed 2 01011b—used to indicate that the PTO device is
establishing a second preprogrammed PTO governor set speed (user programmable) as the
current operating speed.
Preprogrammed PTO Governor Set Speed 3 01100b —used to indicate that the remote PTO
device is establishing a third preprogrammed PTO governor set speed (user programmable) as
the current operating speed.
Preprogrammed PTO Governor Set Speed 4 01101b —used to indicate that the remote PTO
device is establishing a fourth preprogrammed PTO governor set speed (user programmable) as
the current operating speed.
Preprogrammed PTO Governor Set Speed 5 01110b —used to indicate that the remote PTO
device is establishing a fifth preprogrammed PTO governor set speed (user programmable) as the
current operating speed.
Preprogrammed PTO Governor Set Speed 6 01111b—used to indicate that the remote PTO
device is establishing a sixth preprogrammed PTO governor set speed (user programmable) as
the current operating speed.
Preprogrammed PTO Governor Set Speed 7 10000b —used to indicate that the remote PTO
device is establishing a seventh preprogrammed PTO governor set speed (user programmable) as
the current operating speed.
Preprogrammed PTO Governor Set Speed 8 10001b —used to indicate that the remote PTO
device is establishing a eighth preprogrammed PTO governor set speed (user programmable) as
the current operating speed.
PTO set speed memory 1 10010b —Used to indicate that PTO set speed memory one set state is
active.
PTO set speed memory 2 10011b — Used to indicate that PTO set speed memory two set state is
active.
Data Length: 5 bits
Resolution: 32 states/5 bit, 0 offset
Data Range: 0 to 31 Operational Range: same as data range
Type: Status
Supporting information:
PGN 65265
Note: Firmware captures full data range [0x00..0x1F]. All states.
Accelerator pedal position 1:
The ratio of actual position of the analog engine speed/torque request input device (such as an
accelerator pedal or throttle lever) to the maximum position of the input device. This parameter
is intended for the primary accelerator control in an application. If an application has only one
accelerator control, use SPN 91.
For on-highway vehicles, this will typically be the operator’s accelerator pedal. Although it is used
as an input to determine powertrain demand, it also provides anticipatory information to
transmission and ASR algorithms about driver actions.
In marine applications, this will typically be the operator’s throttle lever.