Teltonika FM6320, Руководство пользователя, Страница: 101 / 139

101
Figure 66 Entering CAN configuration

SCAN scans once for available messages on CAN bus;

Monitoring – toggles scanning of messages on CAN bus every 3 seconds;

Offline Configuration – enables CAN configuration when FM6320xx is not connected to
CAN bus;

Auto CAN tab – configure CAN by selecting available messages from CAN bus;

Manual CAN tab – Configure CAN by manually entering CAN message ID and data mask;
Figure 67 CAN configuration menu
13.4.1 Configuration
To start CAN configuration push “SCAN“ button. A table of all available CAN
messages will appear (Fig. 63). Description of columns:

Category – shows CAN message;

Parameter – shows configurable parameter name;

Value – shows scanned value of parameter;

Send data to server – allows to choose the type of data when it‘s generated:
o
Disabled – Data will not be collected
o
On low priority – records will be generated as low priority events;
o
On high priority – records will be generated as high priority events and immediately
sent to server via GPRS (if GPRS is available);
o
On panic - records will be generated as panic priority events and immediately sent
to server via GPRS, if GPRS is not available records will be sent via SMS messages;

Data acquisition type – allows to choose when records are generated:
o
Monitoring – monitors data;
o
On change – record is generated when parameter value is changed;