Televes OLT 769401 Скачать руководство пользователя страница 361

Страница: 361 / 482

361

cli/remote-eq/discovery> create ?

Usage CREATE:

CREATE Create a new ONU.

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

--profileID Identifies a profile by ID.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--fec-upstream Forward Error Correction (FEC) on the Upstream side.

(enable|disable)

--omci-encryption Encryption on the OMCI channel. (enable|disable)

--password Set the password for ONU registration. Up to 10 ASCII characters

or precisely 20 in HEX format (STRING 20)

--serial-number Set the serial number for ONU registration (STRING 16)

--sw-upgrade-mode Set the upgrade mode for this ONU. By choosing ‘planned’ the

argument ‘sw-version’ must be given as well. (off|auto|planned)

--sw-version Define a string to match with a firmware file sw-version string.

(STRING 15).

Figure 7-394: CLI on line help on “create” command usage in this node context

7.6.17.5.5 “insert” command

Name

insert

Description

Start managing a remote ONU. It must be in the ‘new’ state.

Full path

/remote-eq/discovery/ insert

Mandatory Parameters

--profileID
--serial-number

Screen Output

Table 7-357: “insert” command information

/cli/remote-eq/discovery> insert ?

Usage INSERT:

INSERT Start managing one remote ONU. ONUs must be in the ‘New’ state.

--profileID Identifies a profile by ID.

--serial-number Select the ONU by serial number. (STRING 16)

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--fec-upstream Forward Error Correction (FEC) on the Upstream side.

(enable|disable)

--omci-encryption Encryption on the OMCI channel. (enable|disable)

--onuID Identifies an ONU by ID, in this context.

--sw-upgrade-mode Set the upgrade mode for this ONU. By choosing ‘planned’ the

argument ‘sw-version’ must be given as well. (off|auto|planned)

--sw-version Define a string to match with a firmware file sw-version string.

(STRING 15)

Figure 7-395: CLI on line help on “insert” command usage in this node context

Содержание OLT 769401



































































































































































































































































































































































































































































































Результаты поиска

Содержание OLT 769401

Отзывы:

Похожие инструкции для OLT 769401

Бренды по названию

Популярные бренды

Televes OLT 769401, Руководство пользователя

Результаты поиска

Содержание OLT 769401

Отзывы:

Похожие инструкции для OLT 769401

Бренды по названию

Популярные бренды