Televes OLT 769401 Скачать руководство пользователя страница 357

Страница: 357 / 482

357

7.6.17.1 “config-onu-id” command

Name

config-onu-id

Description

Configure an ONU ID for one ONU in state ‘new’.

Full path

/remote-eq/ config-onu-id

Mandatory Parameters

--onuID
--serial-number

Screen Output

Table 7-348: “ config-onu-id “ command information

/cli/remote-eq> config-onu-id ?

Usage:

CONFIG-ONU-ID Configure an ONU ID for one ONU in state ‘new’.

--onuID

Identifies an ONU by ID, in this context.

--serial-number Identify an ONU by serial Number. (STRING 16).

Figure 7-386: CLI on line help on “config-onu-id” command usage in this node context

7.6.17.2 “connect” command

This command defines the remote Equipment that will be used for all following commands.

Name

connect

Description

Set the ONU identifiers (slot, port, onuID) to be used in all future commands.

Full path

/remote-eq/connect

Mandatory Parameters

--onuID
--port

Screen Output

Table 7-349: “connect” command information

/cli/remote-eq> connect ?

Usage:

CONNECT Set the ONU identifiers (slot, port, onuID) to be used in all future

commands.

--onuID Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-387: CLI on line help on “connect” command usage in this node context

Содержание OLT 769401



































































































































































































































































































































































































































































































Результаты поиска

Содержание OLT 769401

Отзывы:

Televes OLT 769401, Руководство пользователя, Страница: 357 / 482

Результаты поиска

Содержание OLT 769401

Отзывы: