Televes OLT 769401 Скачать руководство пользователя страница 427

Страница: 427 / 482

427

/cli/services> create ?

Usage CREATE:

CREATE Create a new network service.

--nni-stag Outer VLAN ID (service) on the network-facing

(Ethernet) interface. (1..4094)

--serviceName The Name for the new service. (STRING 31)

--type Identifies the type of service. (unicast|multicast

|bitstream|univoip|mac bridge)

--uni-ctag VLAN ID delivered/received from the (Ethernet)

subscriber-facing interface at the ONU. (1..4094)

[OPTIONAL]

--add-downlink-ports Add interfaces to the Downlink interface List,

for a given service. (format: slot.port|slot(all) : 3.1,3.5,7)

--add-uplink-lags Add LAG interfaces to the Uplink interface List

for a given service. (format: lagID : 1,2,3)

--add-uplink-ports Add interfaces to the Uplink interface List, for

a given service. (format: slot.port|slot(all) : 3.1,3.5,7)

--admin Administrative State. Enable/disable, in this

context. (enable|disable)

--dhcp Enable or disable the DHCP relay for a given

service. (enable|disable)

--igmp Enable or disable IGMP for a given service.

(enable|disable)

--mcFlood Multicast flooding. (enable|disable)

--pppoe Enable or disable PPPoE for a given service.

(enable|disable)

--stacked Frame format for the uplink interface. If

enabled, it has two VLAN tags, otherwise only one VLAN tag. (enable|disable)

Figure 7-528: CLI on line help on “create” command usage in this node context

About the service type:

Unicast: Bidirectional service, where each frame has only one final destination. These services are used in Residential

applications, where some kinds of packets can be trapped and processed (ex. DHCP, IGMP). In case of Unstacked Services,

MAC Learning is performed.

Multicast: Unidirectional Service, where one frame can be delivered to several destinations. These destinations are

controlled by IGMP Snooping/Proxy.

UniVoIP: Bidirectional Service, where each frame has only one final destination. Similar to Unicast Services, with the

difference that when it’s configured to the ONT, VoIP configurations are downloaded to the ONT.

Bitstream: Bidirectional Service, where each frame has only one final destination. These services are used in Business

applications, where all packets pass transparently by the system and MAC learning is disabled.

7.6.19.4 “remove” command

Name

remove

Description

Remove an existing service

Full path

/services/remove

Mandatory Parameters

--serviceID

Screen Output

Table 7-492: “remove” command information

Содержание OLT 769401



































































































































































































































































































































































































































































































Результаты поиска

Содержание OLT 769401

Отзывы:

Похожие инструкции для OLT 769401

Бренды по названию

Популярные бренды

Televes OLT 769401, Руководство пользователя

Результаты поиска

Содержание OLT 769401

Отзывы:

Похожие инструкции для OLT 769401

Бренды по названию

Популярные бренды