Televes OLT 769401 Скачать руководство пользователя страница 339

Страница: 339 / 482

339

7.6.16.2 “ethernet” sub-node

In this sub-node, it is possible to view, configure, create and remove Ethernet profiles.

Ethernet are created according to MEF naming convention.

There are two Ethernet default profiles created and they can neither be changed nor removed.

Ethernet profiles in use cannot be changed or removed.

7.6.16.2.1 “config” command

Name

config

Description

Configure ethernet traffic profiles.

Full path

/profiles/ethernet/config

Mandatory Parameters

--profileID

Screen Output

Table 7-310: “config” command information

/cli/profiles/ethernet> config ?

Usage CONFIG:

CONFIG Configure ethernet traffic profiles.

--profileID Identifies a profile by ID.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--cbs Committed Burst Size: maximum number of bytes in a burst of packets

that should be guaranteed (0..262144 bytes)

--cir Committed Information Rate: bandwidth that should be guaranteed, on

average (0..1000000000 bit/s)

--ebs Excess Burst Size: maximum number of bytes in a burst of packets if

there is no traffic congestion (0..+Inf. bytes)

--eir Excess Information Rate: bandwidth in excess that can be supplied in

case there is no traffic congestion (0..+Inf. bits/s)

--name Define a name for the specified profile. (STRING 31)

Figure 7-347: CLI on line help on “config” command usage in this node context

7.6.16.2.2”create” command

Name

create

Description

Create an Ethernet traffic profile

Full path

/ profiles/ethernet/create

Mandatory Parameters

Screen Output

Table 7-311: “create” command information

Содержание OLT 769401



































































































































































































































































































































































































































































































Результаты поиска

Содержание OLT 769401

Отзывы:

Похожие инструкции для OLT 769401

Бренды по названию

Популярные бренды

Televes OLT 769401, Руководство пользователя

Результаты поиска

Содержание OLT 769401

Отзывы:

Похожие инструкции для OLT 769401

Бренды по названию

Популярные бренды