Televes OLT 769401 Скачать руководство пользователя страница 347

Страница: 347 / 482

347

7.6.16.4.5 “showconfig” command

Name

showconfig

Description

Print the command list that enforces the current configuration

Full path

/profiles/pbits-to-pq/showconfig

Mandatory Parameters

This command has no parameters

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-327: “showconfig” command information

/cli/profiles/pbits-to-pq> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-364: CLI on line help on “showconfig” command usage in this node context

7.6.16.5 “upstream-dba” sub-node

7.6.16.5.1 “config” command

Name

config

Description

Configure GPON upstream DBA profiles.

Full path

/profiles/upstream-dba/config

Mandatory Parameters

--profileID

Screen Output

Table 7-328: “config” Command parameters

/cli/profiles/upstream-dba> config ?

Usage CONFIG:

CONFIG Configure GPON upstream DBA profiles.

--profileID Identifies a profile by ID.

[OPTIONAL]

--BWeligibility Defines how the non assured bandwidth is handled. (non-

assured|best-effort)

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--assuredBW Maximum bandwidth for DYN type with a granularity of 8kbps.

--dba Set the MAC GPON DBA algorithm to ‘Status Reporting’ if enabled,

or ‘Traffic Monitoring’ if disabled. (enable|disable)

--fixedBW Fixed bandwidth used in CBR and UBR types with a granularity of

8kbps.

--maxBW Maximum bandwidth that results from the sum: Fixed BW + Assured

BW + bandwidth not assured.

--name Define a name for this profile. (STRING 31)

--type Identifies the profile type. (cbr|ubr|dyn)

Figure 7-365: CLI on line help on “config” command usage in this node context

Содержание OLT 769401



































































































































































































































































































































































































































































































Результаты поиска

Содержание OLT 769401

Отзывы:

Похожие инструкции для OLT 769401

Бренды по названию

Популярные бренды

Televes OLT 769401, Руководство пользователя

Результаты поиска

Содержание OLT 769401

Отзывы:

Похожие инструкции для OLT 769401

Бренды по названию

Популярные бренды