Televes OLT 769401 Скачать руководство пользователя страница 372

Страница: 372 / 482

Descripción del producto

372

7.6.17.6.4.6 “status” command

The status command used without parameters shows e1interfaces status information for the ONU specified with the command

/remote-eq/connect –onuID=xx –port=ccc.zz.

If there is no connected ONU, all the parameters must be specified to address the desired ONU otherwise the command will return an error

message,

Figure 7-417: “show” command error message

Name

status

Description

Show all the current E1 interfaces status for a given ONU.

Full path

/remote-eq/onu/e1/status

Mandatory Parameters

Screen Output

Table.

Table 7-378: “status” command information

/cli/remote-eq/onu/e1> status ?

Usage:

STATUS Show all the current E1 interfaces status for a given ONU.

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-418: CLI on line help on “status” command usage in this node contex

7.6.17.6.5 “ethernet” sub-node

7.6.17.6.5.1 “config” command

Name

config

Description

Configures ethernet parameters for the specified ONU

Full path

/ remote-eq/onu/ethernet/config

Mandatory Parameters

--ID

Screen Output

Table 7-379: “config” command information

Содержание OLT 769401



































































































































































































































































































































































































































































































Результаты поиска

Содержание OLT 769401

Отзывы:

Televes OLT 769401, Руководство пользователя, Страница: 372 / 482

Результаты поиска

Содержание OLT 769401

Отзывы: