Televes OLT 769401 Скачать руководство пользователя страница 201

Страница: 201 / 482

201

/cli/acl/rule-ipv4-std> config ?

Usage:

CONFIG Configure an existing IPv4 Standard Rule.

--acl-id Identifies an ACL by ID, in this context.

--rule-id Identifies an ACL Rule by ID, in this context.

[OPTIONAL]

--action permit or deny

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--name Set a name for a specific Rule (STRING 31)

--src-ipv4-addr Source IPv4 Address

--src-ipv4-mask ource Wildcard Mask

Figure 7-41: CLI on line help on “config” command usage in this node context

7.6.1.10.2 “create” command

Name

Create

Description

Create a new IPv4 Standard Rule for a given ACL ID.

Full path

/acl/rule-ipv4-std/create

Mandatory Parameters

--acl-id
--action

Screen Output

Table 7-24: “create” command information

cli/acl/rule-ipv4-std> create ?

Usage:

CREATE Create a new IPv4 Standard Rule for a given ACL ID.

--acl-id Identifies an ACL by ID, in this context.

--action permit or deny

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--name Set a name for a specific Rule (STRING 31)

--rule-id Identifies an ACL Rule by ID, in this context.

--src-ipv4-addr Source IPv4 Address

--src-ipv4-mask Source Wildcard

Figure 7-42: CLI on line help on “create” command usage in this node context

Содержание OLT 769401



































































































































































































































































































































































































































































































Результаты поиска

Содержание OLT 769401

Отзывы:

Televes OLT 769401, Руководство пользователя, Страница: 201 / 482

Результаты поиска

Содержание OLT 769401

Отзывы: