Televes OLT 769401 Скачать руководство пользователя страница 197

Страница: 197 / 482

197

7.6.1.8.2 “remove” command

Name

remove

Description

Remove an existing rule.

Full path

/acl/rule/remove

Mandatory Parameters

--acl-id
--rule-id

Screen Output

Table 7-18: “remove” command information

/cli/acl/rule> remove ?

Usage:

REMOVE Remove an existing rule

--acl-id Identifies an ACL by ID, in this context.

--rule-id Identifies an ACL Rule by ID, in this context.

Figure 7-36: CLI on line help on “remove” command usage in this node context

7.6.1.9 “rule-ipv4-ext” sub-node

7.6.1.9.1 “config” command

Name

config

Description

Configure an existing IPv4 Extended Rule

Full path

/acl/rule-ipv4-ext/config

Mandatory Parameters

--acl-id
--rule-id

Screen Output

Table 7-19: “config” command information

Содержание OLT 769401



































































































































































































































































































































































































































































































Результаты поиска

Содержание OLT 769401

Отзывы:

Televes OLT 769401, Руководство пользователя, Страница: 197 / 482

Результаты поиска

Содержание OLT 769401

Отзывы: