Televes OLT 769401 Скачать руководство пользователя страница 363

Страница: 363 / 482

363

7.6.17.5.8 “reboot-all” command

Name

reboot-all

Description

Send the reboot command to all ONUs (on a given Slot, or interface).

Full path

/remote-eq/discovery/reboot-all

Mandatory Parameters

Screen Output

Table 7-360: “reboot-all” command information

/cli/remote-eq/discovery> reboot-all ?

Usage:

REBOOT-ALL Send the reboot command to all ONUs (on a given Slot, or interface).

[OPTIONAL]

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-398: CLI on line help on “reboot-all” command usage in this node context

7.6.17.5.9 “remove” command

Name

remove

Description

Stop managing one remote ONU. It will return to the ‘NEW’ state if physically

connected.

Full path

/remote-eq/discovery/ remove

Mandatory Parameters

Screen Output

Table 7-361: “remove” command information

/cli/remote-eq/discovery> remove ?

Usage REMOVE:

REMOVE Stop managing one remote ONU. It will return to the ‘NEW’ state if

physically connected.

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-399: CLI on line help on “remove” command usage in this node context

7.6.17.5.10 “remove-all” command

Name

remove-all

Description

Remove all inserted ONUs on a given Slot, or interface. Affected ONUs will

return to the ‘NEW’ state if physically connected.

Full path

/remote-eq/discovery/remove-all

Mandatory Parameters

Screen Output

Table 7-362: “remove-all” command information

Содержание OLT 769401



































































































































































































































































































































































































































































































Результаты поиска

Содержание OLT 769401

Отзывы:

Похожие инструкции для OLT 769401

Бренды по названию

Популярные бренды

Televes OLT 769401, Руководство пользователя

Результаты поиска

Содержание OLT 769401

Отзывы:

Похожие инструкции для OLT 769401

Бренды по названию

Популярные бренды