Televes OLT 769401 Скачать руководство пользователя страница 301

Страница: 301 / 482

301

7.6.10.3.6.4 “mapping” sub-node

This node is used to manage the interfaces that belong to each LAG.

7.6.10.3.6.4.1 “attach” command

Name

attach

Description

Add the specified interface by ‘slot, port’ to the given LAG ID.

Full path

/interfaces/lag/mapping/attach

Mandatory Parameters

--lag-id
--port

Screen Output

Table 7-230: “attach” command information

/cli/interfaces/lag/mapping> attach ?

Usage:

ATTACH Add the specified interface by ‘slot, port’ to the given LAG ID.

--lag-id

Identifies a LAG by ID. (0..14)

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-258: CLI on line help on “attach” command usage in this node context

7.6.10.3.6.4.2 “availableValues” command

Name

availableValues

Description

Display the interfaces that can be used to attach/detach.

Full path

/interfaces/lag/mapping/availableValues

Mandatory Parameters

This command has no parameters

Screen Output

Table Figure 7- . Table parameters description in Table 7-.

Table 7-:231 “availableValues” command information

/cli/interfaces/lag/mapping> availableValues ?

Usage:

AVAILABLEVALUES Display the interfaces that can be used to attach/detach

Figure 7-259: CLI on line help on “availableValues” command usage in this node context

Содержание OLT 769401



































































































































































































































































































































































































































































































Результаты поиска

Содержание OLT 769401

Отзывы:

Televes OLT 769401, Руководство пользователя, Страница: 301 / 482

Результаты поиска

Содержание OLT 769401

Отзывы: