Televes OLT 769401 Скачать руководство пользователя страница 405

Страница: 405 / 482

405

7.6.17.8.5.3 statistics” sub-node

7.6.17.8.5.3.1 “counters” sub-node

7.6.17.8.5.3.1.1 “availableValues” command

Name

availableValues

Description

Display all ONU services where counters can be activated

Full path

/remote-eq/status/services/statistics/counters/availableValues

Mandatory Parameters

Screen Output

Table, Figure 7-479. Table parameters description in Table 7-444.

Table 7-443: “availableValues” command information

/cli/remote-eq/status/services/statistics/counters> availableValues ?

Usage:

AVAILABLEVALUES

Display all ONU services where counters can be activated.

[OPTIONAL]

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-478: CLI on line help on “availableValues” command usage in this node context

Figure 7-479: Output of ”availableValues” command in this node context

Parameter

Description

ONU Service (ID) Name

Available ONU Service identified by Service ID (number) and Service Name

Table 7-444: “availableValues” command output table parameters

7.6.17.8.5.3.1.2 “show” command

Name

show

Description

Show the statistics for a given ONU service, whose counter has already been

activated.

Full path

/remote-eq/status/services/statistics/counters/show

Mandatory Parameters

--serviceID-onu

Screen Output

Table, Figure 7-481, if Service Statistics Counter is active. Table parameters

description in Table 7-446.

Table 7-445: “show” command information

Содержание OLT 769401



































































































































































































































































































































































































































































































Результаты поиска

Содержание OLT 769401

Отзывы:

Televes OLT 769401, Руководство пользователя, Страница: 405 / 482

Результаты поиска

Содержание OLT 769401

Отзывы: