55
To avoid electric shock, ensure that the DUT is connected to the input
terminals of the load properly before you turn on the channel input.
4. View waveform
Press Display key to enter waveform display interface, as shown in
figure 2-47. Here, you can view data with respect to time. Select a data
type to choose the graphed values. Press the Display key again to exit
the waveform display interface and return to the main interface of LED
test mode.
Figure 2-47 Waveform display interface of LED test mode
Waveform Display Function
The electronic load provides the waveform display function and supports the
following operations: pausing,
recording, and capturing the waveform.
Therefore, you can dynamically observe the trend of the input. The waveform
display function is applicable to CC/CV/CR/CP/LED/Con/Pul/Tog/OCPT/
OPPT/List/ Battery/Program/ExtI/ExtV modes.
For example, in CC mode press Display key to enter waveform display
interface, as shown in figure 2-48.
Warning
