manualshive.com logo in svg

Teledyne Sierra M6-2, Руководство пользователя, Страница: 514 / 538

Поделиться
Скачать
Teledyne Sierra M6-2 Скачать руководство пользователя страница 514

Teledyne LeCroy

Display Options

512

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

To customize colors, use the Custom tab.

Figure 5.29: Custom Colors

Note:

You cannot change the color of an Invalid Data (packet error) field. It is permanently set to red.

5.18.3 Formats Display Options

For each type of data in each group of data, the program has a default data format. 
Examples of number data formats are Binary, Decimal, and Hexadecimal. An example of a 
text data format is ASCII. 

To specify a data format for an information type, in the Color/Format/Hiding tab, select a 
row (such as Data) in the Group and Color column and expand it. 

Select a data type in the Group.

Select a format in the Format section. The following formats are available.

Figure 5.30: Formats

If available, select 

Bit

 

Order

 in the Format section. The options are MSB to LSB or LSB to 

MSB.

Содержание Sierra M6-2



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов