manualshive.com logo in svg

Teledyne Sierra M6-2, Руководство пользователя, Страница: 482 / 538

Поделиться
Скачать
Teledyne Sierra M6-2 Скачать руководство пользователя страница 482

Teledyne LeCroy

Sierra Trainer Generation Commands

480

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

WF_NAK_RESERVED_2

 primitive

WF_CREDIT_AVAIL

Credit Available
This function is based on a 10

‐

bit 

counter whose value can range from 

‐

512 to +511 (twos

‐

complement). This 

counter is cleared by sending or 
receiving an OPEN_ACCEPT primitive, 
or by execution of a 
CLEAR_CREDIT_AVAIL command in the 
script. 

This counter is incremented by 
receiving any SAS RRDY primitive and 
is decremented by sending SAS SOF. 
The wait_for command will wait for 
this counter to have a positive value 
b1 and  +511. This wait_for 
condition is intended to be used 
before sending a SAS frame within a 
connection.
ClEAR_CREDIT_AVAIL clears this credit 
function.

WF_CREDIT_BLOCKED_RECEIVED

CreditBlocked Received
This function is based on a flip

‐

flop 

which is cleared by sending or 
receiving an OPEN_ACCEPT primitive. 
It is set by receiving a 
CREDIT_BLOCKED primitive. It is 
intended to be used in conjunction 
with wf_credit_avail to prevent script 
hangs in those cases where there is 
not going to be any more credit 
granted.

WF_CREDIT_BLOCKED

 primitive

WF_RRDY_NORMAL

 primitive

WF_RRDY_RESERVED_0

 primitive

WF_RRDY_RESERVED_1

 primitive

WF_BREAK

 primitive

WF_CLOSE_CLEAR_AFFILIATION

 primitive

WF_CLOSE_NORMAL

 primitive

WF_CLOSE_RESERVED_0

 primitive

WF_CLOSE_RESERVED_1

 primitive

WF_DONE_ACK_NAK_TIMEOUT

 primitive

Wait Command Name

Description

Содержание Sierra M6-2



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов