manualshive.com logo in svg

Teledyne Sierra M6-2, Руководство пользователя, Страница: 35 / 538

Поделиться
Скачать
Teledyne Sierra M6-2 Скачать руководство пользователя страница 35

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

33

Expandability

 Teledyne LeCroy

It is shipped with the following three cables:

Standard 4

‐

pin power connector (ground, 5v, 12v only): This is a direct replace

‐

ment for the existing Power Expansion Card cable.

SATA 15

‐

pin power segment connector: This plugs in to the power segment of 

the standard SATA connector, allowing to control and monitor its power and 
DevSlp.

DevSlp cable: This cable is used to monitor DevSlp levels when the Device is con

‐

nected directly to the Host. It is up to the user to supply a copy of the DevSlp sig

‐

nal coming from the Host to connect to the DevSlp wire of this cable, as well as 
to connect the adequate ground wire of this cable.

1.9.5

Removing Expansion Cards

You can remove both expansion cards using two tools:

Standard (flat blade) 3/16” screwdriver

Teledyne LeCroy Extraction Tool (part number 230

‐

0160

‐

00)

To remove an expansion card, follow these steps:

1. Unplug the system from AC power and turn the system so the expansion port is 

facing you. Note the two retaining screws and the holes for the extraction tool that 
are located on the panel of the expansion card.

Содержание Sierra M6-2



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов