manualshive.com logo in svg

Teledyne Sierra M6-2, Руководство пользователя, Страница: 402 / 538

Поделиться
Скачать
Teledyne Sierra M6-2 Скачать руководство пользователя страница 402

Teledyne LeCroy

Scenario Actions

400

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

When the Jammer implements this action, the result is adding a marker to the captured 
trace in the analyzer data stream. See 

Figure 4.26 on page 400

. The added marker 

(Bookmark = Jammer Marker 7) will be shown as a bookmark in the trace and you can see 
the list of markers in the bookmark dialog. 

Note:

As a function of recorded speed and port configuration, the InFusion marker might be off 

by a tolerance of up to 200 nsec.

Note:

The limitation for adding markers to a trace is 10,000. 

Figure 4.26: Sequence 0: Event = Wait for CRC Error, Action = Add Jammer Marker 7

4.8.4

Summary of Scenario Creation

The suggested process of creating and executing a scenario is as follows:

1. Create a scenario in the main library.
2. Copy the scenario from main library to a device library by drag

‐

and

‐

drop with a 

mouse. (Each device library is associated with a specific InFusion device.)

3. Download all scenarios in the device library to a InFusion device.
4. Select the scenario in the device library that you want to run on the device.
5. To run the scenario, click the 

Start

 

Scenario

 button from the Device Library toolbar. 

The device starts to monitor/modify traffic.

Содержание Sierra M6-2



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов