Teledyne Sierra M6-2 Скачать руководство пользователя страница 28

Страница: 28 / 538

Teledyne LeCroy

Expandability

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

Figure 1.9: Cascading Wrongly

5. Make a note of the last four digits of the MAC address of the unit designated as

Unit 1 and the last four digits of the other units, in order of connection.

Figure 1.10: Address Digits

IMPORTANT!

Power up all units before starting the software.

1.9.2

Select Device

After starting the software, click on

Configuration

nd select

All

Connected

Devices

(see

the following screen capture).

Incorrect way to connect:
The black color pin of the
ribbon wire is connected
in a different way between
the 2 connectors.

Cascading works incorrectly
in this case, the boxes are
connected but no traces
are captured.

Black color pin
of ribbon wire

Содержание Sierra M6-2



























































































































































































































































































































































































































































































































































Результаты поиска

Содержание Sierra M6-2

Отзывы:

Teledyne Sierra M6-2, Руководство пользователя, Страница: 28 / 538

Результаты поиска

Содержание Sierra M6-2

Отзывы: