manualshive.com logo in svg

Teledyne Sierra M6-2, Руководство пользователя, Страница: 314 / 538

Поделиться
Скачать
Teledyne Sierra M6-2 Скачать руководство пользователя страница 314

Teledyne LeCroy

Packet View Toolbar

312

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

Figure 3.122: Goto Command

In Column View, you can right

‐

click a 

DWORD

 inside a frame to display the 

Goto Within Packet

 command. You can jump to an SOF, EOF, HOLD, or R_IP.

Figure 3.123: Goto Within Packet Command

Byte Order

You can change the byte order in fields marked by an arrow and other fields. 

Right

‐

click in the field, select 

Byte

 

Order,

 and choose the ordering.

Figure 3.124: Byte Order

Note:

A blue arrow in the byte order field indicates that it has been changed.

Choose Data Format

You can display data values either in hexadecimal (default) or binary. To choose data 
format, right

‐

click the mouse over a data field, and choose 

Format

 and the format (see 

Figure 3.125 on page 313

).

Содержание Sierra M6-2



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов