Teledyne Sierra M6-2, Руководство пользователя, Страница: 500 / 538

Teledyne LeCroy Generation Options
498 Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual
5.15 Generation Options
Use the Generation Rules to set triggers and filters.
To display the Generation Options dialog, select Generate > Generation Options or click
the Setup Generation Options button.
Figure 5.16: Generation Options Window
The page has the following areas:

Toolbar: Contains buttons that control the Generation Rules page.

Available Events Area: Area where you can park Event buttons that you intend
to use in the Main Display area.

Main Display Area: Area where you configure trigger and filter rules. You config ‐
ure rules by dragging Event buttons from the Available Events area and then
assigning actions to those buttons.

Config Status Indicator: A button that indicates if the rule is valid or invalid. If a
trigger or filter rule is configured correctly, the button is green and indicates
Config is Valid. If a rule is not configured correctly, the button is red and indicates
Config is Invalid.
Pop ‐ Up Menus: When you right ‐ click a button or area in the Generation Rules page, a
context ‐ sensitive pop ‐ up menu appears that lets you do operations that relate to that
button or area.
Properties Dialogs: When you click the Show/Hide Properties Dialog button for an event,
action, or state, a dialog allows you to perform the same operations as in the pop ‐ up
menus.
Toolbar
Main
Display
Area
Config
Status
Indicator
Available
Events
Area