Teleco Perfect Voice Tis 16, Руководство по установке

Страница: 59 / 101

System Administration
PVTis16S3IM
53
Using and Configuring the Default Operator
The default Operator for Perfect Voice Tis16S3 is User ID 0. Whether a caller dials 0 or does not dial
anything from the main greeting he or she is directed to the extension programmed for User ID 0. Perfect
Voice Tis16S3
is pre-programmed with the extension 0 for User ID 0.
To change this, perform the following step:
Programming the Default Operator’s Extension
Enter User ID: 0
Press intercom and call Perfect Voice Tis16S3.
Enter System Access Code: 7
Enter Password for User ID 0.
Press 8 to change the extension.
Enter Extension. When finished, press #
.
Press 5 for User Setup.
Press 9 to Back out of Message Management.
NOTE: If the telephone
system has been
programmed, you may
need to press ** to
cancel auto-login before
dialing 7.
In most installations, programming the default operator’s extension is all that is required. However, you
may choose to customize the installation by enabling off-hours messaging for the default operator. There
are two steps involved in enabling messaging for the Default User:
1. Recording a personal greeting
2. Enabling call blocking.
I&M
?