Teleco Perfect Voice Tis 16, Руководство по установке

Страница: 18 / 101

Installation
PVTis16S3IM
12
Step 5: Install Perfect Voice Tis16S3
1. Locate available slot for Tis16S3.
If there is not an available slot for Tis16S3, stop here. If a T1, DID or TIE line card needs to be relocated to
make room for Tis16S3, do so now. Make sure the necessary programming changes are made to account for
this move.
2. Install Perfect Voice Tis16S3 according to the following steps.
N O T E
Allow Tis16S3 to sit at room temperature for at least 3 hours before applying any
power. Shipping can expose Tis16S3 to temperature extremes. Let Tis16S3 adjust to room
temperature to avoid any possible damage from condensation, etc. Ensure that the
battery is secure before installation.
C A U T I O N – B a t t e r y R e p l a c e m e n t
The Tis16S3 battery can ONLY be replaced with a 3 volt Lithium coin battery,
number CR2032 . There is a risk of explosion if the incorrect battery is used. Dispose
of used battery according to the battery manufacturer’s instructions.
ƒ
Remove Tis16S3 from its protective package. Remember to handle the Tis16S3 card with care.
Wear an anti-static wrist strap and hold the card by its edges.
ƒ
Insert the Tis16S3 PCB into the appropriate slot and apply firm, even pressure to ensure proper
connection.
CAUTION: Do not insert the board too slowly and make sure the board is pushed all
the way in or the key system may behave in an unexpected manner. In most cases, however, this
behavior will correct itself within a couple of minutes.
ƒ
After installing, gently pull the card outward. You should feel a slight resistance. If you don't feel
the resistance, apply pressure again.
Step 6: Restart CIX and Verify Perfect Voice Tis16S3 Is Functioning
Properly
Each Tis16S3 has been preprogrammed at the factory for out-of-box operation on the telephone system.
This includes the integration and configuration parameters, and company greeting and instructions.
ƒ
Turn on the main power switch to the CIX system. Let it proceed without any action from you. The
Power LED should turn green when the system is operational.
ƒ
Dial the extension number for each port. Tis16S3 should (for each port) answer and play the default
company greeting (“Thank you for calling…”).
I&M
?