Tektronix TG700, Руководство пользователя

Страница: 135 / 343

ATG7 Analog Test Generator
ID TEXT.
Sets a text that is overlaid on the test signal output from the SIGNAL
connector. Select this menu item, and then press the ENTER button to access the
ID TEXT submenu. (See page 3-25.)
TIMING.
Sets the timing offset of the SIGNAL output relative to the internal
reference signal (frame reset signal). Select this menu item, and then press the
ENTER button to access the TIMING submenu. (See page 3-27.)
APL. Sets the APL and Bounce features available for the test signal output from
the SIGNAL connector. Select this menu item, and then press the ENTER button
to access the APL submenu. (See page 3-28.)
SELECT OUTPUT
Submenu
Use this menu to set the video format, signal, and timing offset for the BLACK 1,
BLACK 2, or BARS output. You can also use this menu to set the ID text
overlay for the BARS output. The following
fi gure shows the SELECT OUTPUT
submenu.
Figure 3-11: ATG7 module SELECT OUTPUT submenu
SELECT FORMAT. Selects the video format for the selected output. Use the left
( ◄ ) or right ( ► ) arrow button to select NTSC , NTSC No Setup , or PAL .
NOTE. When you change the video format, synchronization shock will occur;
the video format changes immediately at the output as you change the format
selection.
Select the format you want, then press the front-panel ENTER button to access
the SELECT SIGNAL submenu, where you select the output signal to use. (See
page 3-24.)
TG700 TV Signal Generator Platform User Manual 3–23