Tektronix TG700, Руководство пользователя

Страница: 139 / 343

ATG7 Analog Test Generator
TIMING Submenu Use this menu to adjust the timing offset of the selected output relative to the
internal reference signal (frame reset signal). Use the up (
▲ ) or down ( ▼ ) arrow
button to scroll through the menu. The following fi gure shows the TIMING
submenu.
Figure 3-14: ATG7 module TIMING submenu
Vertical.
Sets the vertical timing offset. Use the left ( ◄ ) or right ( ► ) arrow
button to change the timing offset. You can set the value from -1/2 color frame to
+1/2 color frame in 1 line steps.
Horizontal.
Sets the horizontal timing offset. Use the left ( ◄ ) or right ( ► ) arrow
button to adjust the timing offset. You can set the value from -1 line to +1 line
in one clock steps (18.5 ns).
NOTE.
You can reset the timing offset to zero by pressing the left ( ◄ ) or right ( ► )
arrow buttons simultaneously.
The ATG7 horizontal timing can only be adjusted in clock cycle increments. You
can match the AGL7 or GPS7 module timing to the ATG7 module by adjusting the
fi ne timing controls on the AGL7 or GPS7 module.
TG700 TV Signal Generator Platform User Manual 3–27