Tektronix TG700, Руководство пользователя

Страница: 94 / 343

Operating Basics
NETWORK SETUP
Submenu
Use this menu to set the network parameters for the 10 BASE-T port on the
TG700, which will be used when you remotely control the TG700 using a PC
and when you transfer
fi les between the TG700 and a PC. Refer to Connecting
to a Network for detailed information about connecting the TG700 to a PC. (See
page 2-30.) Use the up ( ◄ ) or right ( ► ) arrow button to scroll through the menu
items. The following fi gure shows the NETWORK SETUP submenu.
Figure 2-23: NETWORK SETUP submenu
DHCP. Enables or disables the TG700 to receive IP address settings using the
DHCP (Dynamic Host Con fi guration Protocol) service on your network. Use the
left ( ◄ ) or right ( ► ) arrow button to select between Enable and Disable . Press
the ENTER button to implement the selection. If you select Disable in this menu,
you will need to set address values in each of the following menu items.
NOTE.
Under some network environments, the TG700 might not be able to get
the IP address automatically from a DHCP server. In this case, you need to enter
the appropriate address value in each submenu item.
Refer to your network administrator or to the user documentation supplied with
your network server operating system (OS) for detailed information about DHCP
server functions.
2–26 TG700 TV Signal Generator Platform User Manual