Tektronix TG700, Руководство пользователя

Страница: 321 / 343

HDVG7 HDTV Digital Video Generator
OVERLAY.
Selects an item (logo, text, or circle) that is overlaid on the output test
signal and sets the blinking mode for the overlay. Select this menu item, and then
press the
ENTER button to access the OVERLAY submenu. (See page 3-211.)
AUDIO (EMBEDDED).
Sets the parameters for embedded audio on the output test
signals. Use the left ( ◄ ) or right ( ► ) arrow button to select Group 1 , Group 2 ,
Group 3 , or Group 4 . Select any of the items, and then press the ENTER button
to access the AUDIO GROUP submenu. (See page 3-216.)
TIMING.
Sets the timing offset of the serial digital video outputs relative to the
internal reference signal (frame reset signal). Select this menu item, and then
press the
ENTER button to access the TIMING submenu. (See page 3-218.)
TIMECODE.
Sets the timecode parameters for the module outputs when a
GPS7 module is installed. To support this capability, the module hardware must
be version 2.0 or above. The TG700 mainframe must have software version 5.1
or above installed. Select this menu item, and then press the
ENTER button to
access the TIMECODE submenu. (See page 3-219.)
VIDEO. Enables or disables the Y, Pb, or Pr component of the output serial digital
video signals and the output mode for audio/video timing measurement. Select
this menu item, and then press the
ENTER button to access the VIDEO submenu.
(See page 3-220.)
BLACK (OPTION).
This menu is only available with Option BK, and sets the
parameters of the serial digital black signals output from the BLACK 1 and
BLACK 2 connectors. Select this menu item, and then press the ENTER button
to access the BLACK submenu. (See page 3-221.)
TG700 TV Signal Generator Platform User Manual 3–209