Tektronix TG700, Руководство пользователя

Страница: 22 / 343

Compliance Information
EMC Compliance Meets the intent of Directive 2004/108/EC for Electromagnetic Compatibility
when it is used with the product(s) stated in the speci
fi cations table. Refer to the
EMC speci fi cation published for the stated products. May not meet the intent of
the directive if used with other products.
European Contact.
Tektronix UK, Ltd.
Western Peninsula
Western Road
Bracknell, RG12 1RF
United Kingdom
1 To ensure compliance with the EMC standards listed here, high quality shielded interface cables should be used.
2 Equal to or < 40A peak in-rush current for equal or less than 5 line cycles, after the instrument has been turned off
for at least 30 seconds.
Australia / New Zealand
Declaration of
Conformity – EMC
Complies with the EMC provision of the Radiocommunications Act per the
following standard, in accordance with ACMA:
EN 55022:1987. Radiated and conducted emissions, Class B, in accordance
with EN 55103-1:1996.
Safety Compliance
EC Declaration of
Conformity – Low Voltage
Compliance was demonstrated to the following speci fi cation as listed in the
Of fi cial Journal of the European Communities:
Low Voltage Directive 2006/95/EC.
EN 61010-1: 2001. Safety requirements for electrical equipment for
measurement control and laboratory use.
U.S. Nationally Recognized
Testing Laboratory Listing
UL 61010B-1, 1
st
Edition. Safety requirements for electrical equipment for
measurement control and laboratory use.
Canadian Certi fi cation CAN/CSA C22.2 No. 1010.1-92 & 1010.1B-97, 1
st
Edition. Safety
requirements for electrical equipment for measurement, control, and
laboratory use. Part 1.
Additional Compliances IEC 61010-1: 2001. Safety requirements for electrical equipment for
measurement, control, and laboratory use.
Equipment Type Test and measuring equipment.
xiv TG700 TV Signal Generator Platform User Manual