Tektronix TG700, Руководство пользователя

Страница: 88 / 343

Operating Basics
5. Enter all of the desired characters then press ENTER button.
6. Press the CANCEL button twice to exit the PRESET submenu. This returns
to the top of the mainframe main menu.
7. Press the ENTER button to reenter the PRESET submenu.
8. Use the up ( ▲ ) or down ( ▼ ) arrow button to select the SAVE menu item.
9. Use the left ( ◄ ) or right ( ► ) arrow button to select the preset name edited
in step 2.
10. Press ENTER button to save the preset with the new name.
DELETE.
Deletes the speci fi ed preset. Use the left ( ◄ ) or right ( ► ) arrow
button to select the preset you want to delete, and then press the ENTER button
to implement the selection. You cannot delete the following presets: Power on
Default, User Default, and Factory Default.
SEQUENCE Submenus Use this menu to select and run a sequence that is already loaded into the TG700.
(See Figure 2-18.) A sequence is a series of generator settings de
fi ned using the
Tcl language and SCPI commands. The TG700 loads a sequence and runs the
command and settings in the order dictated by the sequences
fi le.
Figure 2-18: SEQUENCE submenu
PLAYBACK.
Selects and runs a sequence. Use the left ( ◄ ) or right ( ► ) arrow
button to select the sequence you want to run, and then press the ENTER button to
run the sequence.
If no sequence is loaded into the instrument, the message "No Sequence Found" is
displayed on the second line.
STOP.
Stops the currently running sequence. When you select the menu item and
then press the ENTER button, the sequence is stopped.
Refer to the TG700 Programmer Manual for detailed information about using
sequences.
2–20 TG700 TV Signal Generator Platform User Manual