Tektronix TG700, Руководство пользователя

Страница: 136 / 343

ATG7 Analog Test Generator
TIMING.
Sets the timing offset of the selected output relative to the internal
reference signal (frame reset signal). Select this menu item and press the ENTER
button, to access the TIMING submenu. (See page 3-27.)
ID TEXT.
Sets a text that is overlaid on the test signal output from the BARS
connector. Select this menu item and press the ENTER button to access the
ID TEXT submenu. (See page 3-25.)
SELECT SIGNAL Submenu
Use this menu to select an output signal for the BLACK 1, BLACK 2, or BARS
connector. The following
fi gure shows the SELECT SIGNAL submenu.
Figure 3-12: ATG7 module SELECT SIGNAL submenu
Use the left ( ◄ ) or right ( ► ) arrow button to scroll through the selections. Press
the ENTER button to enable the selected signal.
Which signals are available depend on the selected output connector and the video
format. The following table lists the available signals for each output connector
and video format.
Table 3-6: Test signals in the ATG7 SELECT SIGNAL submenu
Format Test signals
BLACK1 and BLACK 2 connectors
NTSC and NTSC No Setup Black Burst, Black Burst with Field REF,
Composite Sync, Composite Blanking,
Subcarrier, H Drive, V Drive, Field Reference
PAL Black Burst, Black Burst No Field REF, Composite
Sync, Composite Blanking, Subcarrier, H Drive,
V Drive, Field Reference, PAL Pulse
3–24 TG700 TV Signal Generator Platform User Manual