Tektronix TG700, Руководство пользователя

Страница: 99 / 343

Operating Basics
3. Use the up ( ▲ ) or down ( ▼ ) arrow button to select Network .
4. Use the left ( ◄ ) or right ( ► ) arrow button to select Setup . This accesses the
NETWORK SETUP submenu. (See Figure 2-23 on page 2-26.)
Setting the Parameters on a Network with a DHCP Server.
If your network has a
DHCP server, use the NETWORK SETUP submenu to enable the TG700 to
function as a DHCP client. When the TG700 is connected to the network and
DHCP service is enabled, the TG700 obtains the necessary network addresses
automatically from the DHCP server.
NOTE. Under some network environments, the TG700 may not be able to get the
IP address automatically from a DHCP server. In this case, you need to enter the
appropriate address value in each submenu item.
Refer to your network administrator or to the user documentation supplied with
your network server operating system (OS) for detailed information about DHCP
server functions.
Setting the Parameters on a Network without a DHCP Server.
If your network does
not have a DHCP server, perform the following procedure to set the network
parameters.
1. If you connect the TG700 directly to a single PC:
a. Set the IP ADDRESS parameter to be the same IP address as the PC’s
address except for the last number. The last number must be different than
the last number in the PC’s IP address.
b. Set the SUBNET MASK parameter to be the same net mask (subnet
mask) used by the PC. Do not enter a number if the PC does not have
a net mask.
c. You do not need to enter a BRDCAST ADDR and GATEWAY ADDR if
you are directly connected to a single PC.
2. If you connect the TG700 to your local Ethernet network, see the Caution
note below.
CAUTION.
To prevent communication con fl icts on your Ethernet network, ask your
local network administrator for the correct numbers to enter in the NETWORK
PARAMETERS submenu if you connect the TG700 to your local Ethernet network.
3. Verify the Ethernet connection by using a ping command from the PC.
TG700 TV Signal Generator Platform User Manual 2–31