Tektronix TG700, Руководство пользователя

Страница: 35 / 343

Getting Started
The following fi gure shows how to install the TG700 into the rack. Carefully
insert the rack slides attached to the TG700 into the pieces attached to the rack.
Support the TG700 until the stop latches click into place on both sides. The
installation is not secure until this latching occurs. Continue to slide the TG700
completely into the rack.
Figure 1-2: Placing the TG700 in the rack
To remove the TG700 from the rack, slide it out until it stops at the catches.
Support the TG700 while you press in on the stop latch buttons on each side. This
action will free the TG700 to slide completely out of the rack. Provide support
while you slide the TG700 mainframe out of the rack.
Environmental Operating
Requirements
Check that the location of your installation has the proper operating environment
as listed in the following table. (See Table 1-3.)
CAUTION.
Damage to the instrument can occur if this instrument is powered on at
temperatures outside the speci fi ed temperature range.
Table 1-3: TG700 environmental requirements
Parameter Description
Operating 0 °C to +50 °C Temperature
Nonoperating –20 °C to +60 °C
Operating 20% to 80% (No condensation); Maximum wet-bulb
temperature 29.4 °C Relative
Humidity
Nonoperating 5% to 90% (No condensation); Maximum wet-bulb
temperature 40.0 °C
TG700 TV Signal Generator Platform User Manual 1–7