manualshive.com logo in svg

Tektronix DAS 9221 Option 04, Руководство пользователя

Поделиться
Скачать
Tektronix DAS 9221 Option 04 Скачать руководство пользователя страница 80

Operating Basics

2–32

DAS System User Manual

5. A pop-up window appears. Verify that the selection “lock cursors at the same

sequence” is highlighted and press the right button. The pop-up window
closes and the cursors are locked together.

6. Select function key F8: EXIT & SAVE. The overlay closes and the

split-screen menu appears. The menu should look similar to Figure 2–16.

Figure 2–16: Split-Screen Menu

You can use the mouse to scroll data in either side of the split screen.
Because you have locked the cursors together, scrolling data in one screen
automatically scrolls the data in the other (and the cursors will track each
other).

Conclusion

You have now had the opportunity to become familiar with operating the menus
of the system. You may want to spend some time experimenting with other
menus to become more familiar with the operation. For more details on the
individual Setup and Display menus, refer to the user manual for your acquisi-
tion module. For more information on the system menus and the utility menus,
refer to the Reference chapter in this manual.

Содержание DAS 9221 Option 04





















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды