manualshive.com logo in svg

Tektronix DAS 9221 Option 04, Руководство пользователя

Поделиться
Скачать
Tektronix DAS 9221 Option 04 Скачать руководство пользователя страница 70

Operating Basics

2–22

DAS System User Manual

Defining Setup Menus

Now that you have become familiar with the basic mouse operation, you are
ready to learn more about using the Setup and Display menus for acquiring data
and displaying results.

The first step would be to connect the mainframe to the system-under-test. This
basically means connecting probes. For the purposes of this tutorial, you will not
connect probes to a system-under-test.

After you connect the probes to the system-under-test, you will normally set up
the Config (Configuration) menu.

NOTE

. If your system has a pattern generation module, select the acquisition

module in the Menu Selection overlay. Do this by selecting the MENU button at
the bottom of the menu and pointing the mouse at the acquisition module under
the Module column. Press the left mouse button and then return to the Diagnos-
tics menu.

1. To quickly select the Config menu, point the mouse at the CONFIG button

on the lower-left side of the window and press the left mouse button. The
system displays the Config menu.

2. Point the mouse at the highlighted Software Support field and press the right

button to open and display the different software support selections.

The Software Support field lists all of the software applications that support
the acquisition module in addition to the General Purpose and High-Speed
Timing support. Once you choose a software support, your instrument will
automatically define the Setup menus.

3. Point the mouse at the High-Speed Timing selection (or any other selection

in the Software Support field) and press the right button. The pop-up menu
will close and the High-Speed Timing selection will be listed in the field.
However, before any changes can take effect, you will be asked to confirm
your action.

You can always respond to a query by pressing the keys as described in the
query message or use the mouse. To confirm your action with the mouse,
point the mouse to the center of the query message and press the left button.
To abort or reject your action, point the mouse anywhere outside of the
message and press the left button; the select field will return to its previous
selection and no changes will take place.

4. While the query message is displayed, point the mouse outside of the

message and press the left button to abort the selection.

Set Up the Config Menu

Содержание DAS 9221 Option 04





















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды