manualshive.com logo in svg

Tektronix DAS 9221 Option 04, Руководство пользователя

Поделиться
Скачать
Tektronix DAS 9221 Option 04 Скачать руководство пользователя страница 235

Appendix F: User Service

DAS System User Manual

F–23

The Network Print Queue information in the Print Screen Setup overlay shows
that data has been sent to the printer, but no output appears at the printer.

H

Verify that the printer is on line and has paper.

H

Verify that the output format specified in the overlay is compatible with the
output format of the printer.

An output image is generated and placed in the Network Print Queue (one or
more print jobs are in the queue). However, the Status line in the Print Screen
Setup overlay indicates that the DAS cannot communicate with the host.

H

Verify that the printer is on line and has paper.

H

Verify that other hosts on the network can communicate with the printer.

H

Verify that the network printer has a TCP/IP-compatible interface with
lpr support.

H

Verify that the internet address and printer name settings in the overlay are
correct for the remote printer.

H

Check the network connections between the DAS and the printer (try executing
the /etc/ping command from the terminal or workstation to the printer).

Instrument Options

This section lists some of the options available for the DAS/XP and DAS/NT
systems. Table F–5 lists the basic options for the DAS/XP mainframe and
Table F–6 lists the basic options for the DAS/NT mainframe. Power cord options
for both mainframes are listed separately (see Table F–7).

Table F–5: DAS/XP System Options 

Option

Description

2C

GPIB Module. Includes 92C02 GPIB Module, GPIB Cable, DAS 9200
Programmatic Command Language User Manual, Module Installation
Instructions, and hardware

3D

Delete probes, lead sets, and KlipChips

04

EMI. Includes probe retainer kit and grounding clip

4X

Substitute 17-inch terminal for 15-inch terminal

5C

Thicknet (AUI)

05

Rackmount. Includes manual, chassis track, retainer bracket, and hardware

18

Removable Media. Includes storage box, media frame & cartridge, and label

No Data Printed to

Network Printer

Содержание DAS 9221 Option 04





















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды