manualshive.com logo in svg

Tektronix DAS 9221 Option 04, Руководство пользователя

Поделиться
Скачать
Tektronix DAS 9221 Option 04 Скачать руководство пользователя страница 242

Appendix G: DASdisk Utility

G–4

DAS System User Manual

To unpack a file set, select the Unpack operation from the Main menu and
perform the following steps:

1. In the PC Fileset Name field, enter the name of the file set to be unpacked;

press the Return key. Pressing the Return key without specifying a file set
aborts the operation.

2. In the Destination Directory Name field, enter the name of directory in

which to place the unpacked files of the file set. DASdisk automatically
creates this directory. If you press the Return key without specifying the
directory, DASdisk assigns the specified file set name to the destination
directory. If the name for the destination directory and the file set are
identical, when the operation is complete, the original file set will no longer
exist; if they differ, the original file set is unaffected.

3. Enter Y to confirm the operation.

4. After the operation is complete, press any key to return to the Main menu.

The Pack operation lets you create a file set from files in a PC directory. You can
also repack a directory that was unpacked. You perform the Pack operation on file
types that the DAS expects to be file sets. See File Sets on page G–2 for a list of
file types.

If you repack a directory, the directory will contain a file called mapfile which
contains a list of the original files in the file set. This file must be present in the
source directory to successfully pack the file set. DASdisk will only pack files in
the directory that were in the original file set.

To pack a file set, select the Pack operation in the Main menu, and perform the
following steps:

1. In the PC Directory Name field, enter the name of the directory that contains

the files to be packed; press the Return key. Pressing the Return key without
specifying a directory aborts the operation.

2. In the Destination Directory Name field, enter the name of the packed file

set. If the destination file set exists already, its contents will be overwritten.
If you press the Return key without specifying a file set name, DASdisk
names the file set with the name of the directory to be packed. If the file set
name and the directory name are identical, when the operation is complete,
the directory will no longer exist; if they differ, the source directory is
unaffected.

3. Enter Y to confirm the operation.

4. After the operation is completed, press any key to return to the Main menu.

Pack Operation

Содержание DAS 9221 Option 04





















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды