manualshive.com logo in svg

Tektronix DAS 9221 Option 04, Руководство пользователя

Поделиться
Скачать
Tektronix DAS 9221 Option 04 Скачать руководство пользователя страница 46

Getting Started

DAS System User Manual

1–23

Application software packages are available; each package includes an instruc-
tion manual. Refer to the appropriate manual for more detailed information. A
list of application software currently installed is shown in the Version menu. Use
the Disk Services menu to install application software from floppy disks.

The Microprocessor Support packages provide both hardware and software
mnemonic disassembly formats. Each support package includes a microproces-
sor-specific probe adapter which provides the hardware necessary to properly
acquire data from the microprocessor.

First Time Operation

After connecting the terminal and the probes, you should be ready to power on
the instrument.

Power on the terminal and then the mainframe. The terminal performs its
power-on checks; then the power-on sequence for the system begins. The DAS
temporarily displays a power-on screen with the product logo, system software
version, and information on the hard and floppy disk drives.

When the power-on sequence is complete, the system displays the Menu
Selection overlay. You are now ready to use the DAS.

Acquire data by using the following basic steps:

1. Connect the probes from the DAS to the system-under-test. If necessary,

refer to your acquisition module user manual for details on connecting
probes.

2. Set up the acquisition parameters by either programming the Setup menus or

by restoring a setup from the hard disk drive.

3. Acquire data (normally you can press the F1: START function key).

4. Use the Display menus to analyze the results of the acquired data.

These are the basic steps for acquiring data. You should refer to the acquisition
module user manual for more details on setting up and using the menus.

The Digital Analysis System is a powerful tool for solving complex problems. It
can be as simple as pressing the start button. For more complex applications, you
can restore or load setups from application software programs and analyze the
resultant data on a host computer network.

The following tools or products can be used with the Digital Analysis System to
help you solve hardware or software problems.

Application Software

Performing an Acquisition

Moving Forward

Содержание DAS 9221 Option 04





















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды