manualshive.com logo in svg

Tektronix DAS 9221 Option 04, Руководство пользователя

Поделиться
Скачать
Tektronix DAS 9221 Option 04 Скачать руководство пользователя страница 149

Reference

3–68

DAS System User Manual

You can use the Setup Print overlays to print the Setup menu data and data
acquired by the DAS in the State, Timing, or Disassembly menus. Unlike using
the Print Screen tool, the print data does not include all information displayed on
the menu (such as function key legends). You specify the amount and type of
data to print in the individual Setup Print overlays.

Select the PRINT button in the Setup or Display menus to display the Setup
Print overlay. The individual overlays are described in more detail in the 92A96
& 92C96 User Manual and to the 92S16/32 User Manual.

You can print the data from a Setup menu or print acquired data or reference
memory data from the State menu or the Disassembly menu. The printed data is
generated using ASCII characters and looks similar to the data on the screen.

To print a hardcopy of a Setup menu, or of State or Disassembly data to a serial
printer, perform the following steps:

1. If you have not already done so, connect an appropriate RS-232 cable

between the serial port on the printer and the Auxiliary port on the rear panel
of the mainframe.

Be sure to select a cable compatible with the configuration of the serial
interface port on your printer. Refer to your printer manual for information
on the characteristics of its serial interface.

2. Set the parameters of the serial communications port on the printer and the

system. These parameters must match. Refer to your printer manual for
information on how to set the parameters for its serial interface. The
parameters for the system are set from the Communications menu. You can
also set the baud rate using the DIP switches on the Controller board near the
rear panel of the mainframe.

3. Display the menu or data you want to print on your terminal. With the

mouse, point at the PRINT button at the bottom of the menu; click on the
left mouse button to call the appropriate print overlay.

4. Select RS-232 Auxiliary Port in the Send Output To field.

5. Define the remaining print parameters in the overlay.

6. Select the appropriate function key legend to begin printing data.

Refer to your module user manual for information on accessing and using the
State Print or Setup Print overlays. Refer to your microprocessor support user
manual for information on accessing and using the Disassembly Print overlay.

Hard Copy of a Setup,

State, or Disassembly

Menu

Содержание DAS 9221 Option 04





















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды