manualshive.com logo in svg

Tektronix DAS 9221 Option 04, Руководство пользователя

Поделиться
Скачать
Tektronix DAS 9221 Option 04 Скачать руководство пользователя страница 58

Operating Basics

2–10

DAS System User Manual

Utility menus provide system-level tools. They allow you to control data
transfers to and from the hard and floppy disks, and they allow you to define the
parameters that control the communication ports.

The following Utility menus are available:

H

Save/Restore Menu. This menu allows you to save instrument setups and
acquisition memory data, restore instrument setups from previously saved files,
and delete instrument setup and reference memory files from the hard disk.

H

Disk Services Menu. This set of menus provides the tools necessary to
duplicate the contents of a floppy disk, format and verify floppy disks,
backup and restore user files with floppy disks, and copy and delete specific
files. A directory of all existing file names on floppy or hard disks is
provided; accompanying information specifies the number of kilobytes the
file occupies and the creation or revision date and time of the file.

H

Symbol Editor Menu. This menu allows you to create and edit symbol tables
that you can use to specify trigger word patterns and evaluate acquired data.
You can create and edit either range or pattern type symbol tables.

H

Communications Menu. This menu specifies RS-232 port settings and view
network settings. You can specify baud rates and flow control for each
RS-232 port.

H

Diagnostics Menu. This menu provides a list of major system components, a
diagnostic report indicating operational status at power on, a summary and
brief description of the modules installed in the instrument, the system
software version, date and time, and some general user instructions.

H

Version Menu. This menu displays the version numbers of all installed
modules, the current system software, and all installed application software.

Application menus control the operation of application software packages. Most
software supporting the application packages resides on floppy disks and must be
loaded onto the system hard disk before being used. Microprocessor Support
packages provide mnemonic disassembly formats. All nonresident application
software and corresponding menus are described in separate manuals supporting
each application software package.

Utility Menus

Application Menus

Содержание DAS 9221 Option 04





















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды