manualshive.com logo in svg

Tektronix DAS 9221 Option 04, Руководство пользователя

Поделиться
Скачать
Tektronix DAS 9221 Option 04 Скачать руководство пользователя страница 208

Appendix E: Configuration Utility

E–8

DAS System User Manual

Enter the new value in the format server_name:d.s, where server_name is the
system name of the X server device, d is the single digit number of the display
on that device, and s is the single digit number of the screen on that display.
The display number is required; however, the screen value will default to .0 if
not specified. To retain the current name, press the Return key without entering
any numbers.

This name is only for informational purposes, unless the default X server address
parameter is set to Use Name. In this case, there must be an entry in the
instrument’s /etc/hosts table that associates this name with an X server address.

If the operating mode is set to something other than 9202XT or 92XTerm
Autostart, this parameter has no affect. Your system administrator should provide
you with the correct name for your default X server.

Selecting item X from the Main menu lets you specify the default X server
address. The default X server address specifies the Internet address of the
X server that displays the window in the 9202XT or 92XTerm Autostart
operating modes. In this mode, the instrument automatically initiates an
X window display on the default X server when the instrument is powered on. If
this parameter is set to the special value of Use Name, then the default X server
name is used instead of the address. In this case, the default X server name and
address must be entered in the /etc/hosts file.

If the operating mode is set to something other than 92XTerm Autostart or
9202XT, this parameter has no affect. Your system administrator should provide
you with the correct Internet address for your default X Server.

Enter the new value in the format XXX.XXX.XXX.XXX (where each XXX
represents a decimal number in the range of 0 to 255), or enter –1 to select the
Use Name option, and press the Return key. To retain the current address, press
the Return key without entering any numbers.

Selecting item L from the Main menu lets you set the service number assigned to
the DAS LAN PCL (LANP) service. This number is used by host software
requesting LAN PCL services from the instrument. The legal range of values for
this entry is 1025 to 65535. Host software provided by Tektronix assumes that
this service is assigned the value 10999. If you specify a different value, you
must also change the host-based software.

Enter a new value in the range of 1025 to 65535, or press the Return key without
entering number to retain the current value.

Set Default X Server

Address

Set LANPCL Port Number

Содержание DAS 9221 Option 04





















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды