manualshive.com logo in svg

Tektronix DAS 9221 Option 04, Руководство пользователя

Поделиться
Скачать
Tektronix DAS 9221 Option 04 Скачать руководство пользователя страница 69

Operating Basics

DAS System User Manual

2–21

1. Before continuing with this tutorial, make sure that the Diagnostics menu is

displayed.

2. Select the Notes key and then select function key F5: SET TIME. A brief

description of the function key and the Set Date/Time overlay appears.

3. Select function key F1: START. A description of the purpose of the function

key appears.

4. Now point the mouse at the location where function key F2 would normally

appear. A note appears telling you that there is no function for key F2. The
system knows that there is no valid function assigned for the key.

5. Point the mouse in the middle of the Diagnostics menu and press the left

button. A message appears describing the purpose of the left mouse button.

6. Press the Esc key to erase the messages on the menu.

7. Select function key F5: SET TIME to call the Set Date/Time overlay.

8. Point the mouse at the Month field and press the left button to move the

cursor to the Month field.

9. Select the Notes button. A message appears describing the purpose of the

field.

10. Point the mouse at the long message window just above the function key

legend and press the left button. The message window closes and the notes
disappear.

11. With the cursor still in the Month field, point at the field and press the right

button. A pop-up menu opens listing possible selections for the Month field.

12. Select the Notes button. A set of notes describing the current highlighted

selection appears.

Depending on the contents of the field, different messages appear for each
field. Other times, when the notes information is not critical, the same note
appears for each selection.

13. Clear the notes by pressing the Return key. The notes disappear and the field

closes.

14. Before closing the overlay, verify that the correct date and time are selected.

Close the overlay by selecting function key F8: EXIT & SAVE.

Whenever you need information on a field or function key, the on-line notes can
be quite helpful.

Содержание DAS 9221 Option 04





















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды