manualshive.com logo in svg

Tektronix DAS 9221 Option 04, Руководство пользователя

Поделиться
Скачать
Tektronix DAS 9221 Option 04 Скачать руководство пользователя страница 112

Reference

DAS System User Manual

3–31

Disk Services Menu

The Disk Services menu allows you to do the following operations:

H

Copy or delete files on the hard or floppy disk.

H

Format and verify floppy disks.

H

Duplicate the entire contents of a floppy disk on another floppy disk.

H

Install or remove application software.

H

Identify the floppy disk and file type.

H

Backup user files from the hard disk to floppy disks.

H

Restore user files from floppy disks to the hard disk.

Once in the Disk Services menu, you can access all operations for file and floppy
disk manipulation; the menu has no overlays.

The Disk Services menu cannot be used for rebuilding the hard disk with the
operating system software; for rebuild information, refer to Appendix D: Loading
System Software. However, the Disk Services Install Application operation is
used when loading application software to the mainframe hard disk.

There are a few guidelines that you should be aware of when you use the Disk
Services menu:

H

Do not use file transfer or removal programs with a host computer while the
files are being used by the system.

H

Do not use a host computer to remove a file currently being used by the system.
For example, do not remove a reference memory while it is being displayed or
symbol tables while they are being displayed or used for triggering.

H

Do not use a host computer to access files that are being written to by the
system (for example, reference memories and setup files).

The following list briefly describes some of the file types that can be selected in
the Disk Services menu. These files and directories are also used with other file
transfer operations such as Kermit, DASdisk, ftp, and PCL.

H

A16 Deskew. Selects files containing saved 92A16 deskew values.

H

A16 Trigger. Selects files containing saved 92A16 user-defined trigger setups.
Refer to the description of the Trigger Library in the 92A16/16E User Manual.

H

A60-90 Deskew. Selects files containing saved 92A60/90 deskew values.

Содержание DAS 9221 Option 04





















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды