Tektronix DAS 9221 Option 04, Руководство пользователя

Страница: 172 / 276

Appendix C: Error Messages
C–6
DAS System User Manual
Table C–1: Error Messages (Cont.)
Error Message Explanation
Insufficient channels assigned to this group,
use 0 or 1. You entered a value in a word recognizer field that is legal for the group radix, but
which cannot be used because there aren’t enough bits associated with that digit to
handle the value entered. Enter the value again using 0 or 1.
Leading character in this field cannot be
+ or –. Entries in this field may not begin with + or –. Begin entry with an alphanumeric
character.
Lines-per-page value too large for PostScript,
set to maximum. PostScript allows a maximum of 60 lines per page.
Maximum legal value is 4,999,995 ns. Entry exceeds maximum allowable value for this field. Enter a value between
0 and 4,999,995 ns.
Maximum legal value is 320 ns. Entry exceeds maximum allowable value for this field. Enter a value between
0 and 320 ns.
Maximum legal value is 64. Entry exceeds maximum allowable value for this field. Enter a value between
0 and 64.
Maximum legal value is 999,999. Entry exceeds maximum allowable value for this field. Enter a value between
0 and 999,999.
Maximum number of Action Macros already
defined. You must delete an Action Macro in order to define another.
Maximum number of Event Macros already
defined. You must delete an Event Macro in order to define another.
Maximum of [n] groups allowed. You cannot add any more groups without deleting currently existing ones.
Maximum of 1 Action per Counter/Timer per
Clause. You cannot assign more than one Action to a counter/timer.
Maximum of 1 Edge Event per Clause. A Clause cannot contain more than one Edge Event.
Maximum of 1 Action per Signal in a Clause. A Signal can only perform one Action at a time.
Maximum of 1 Event Filter per State. A State cannot contain more than one Event Filter.
Maximum of 1 Glitch Event per Clause. A Clause cannot contain more than one Glitch Event.
Maximum of 1 “Go To State” Action per
Clause. A Clause cannot contain more than one “Go To State” Action.
Maximum of 1 unique Edge-type Channel
Event. Only one edge-detector resource is available.
Maximum of 1 unique Glitch-type Channel
Event. Only one glitch-detector resource is available.
Maximum of 2 Simple Events per Clause. A Clause cannot contain more than two Simple Events.
Maximum of 4 States. The Trigger Program already contains the maximum allowable number of States.
Maximum of 8 pods per group. A group cannot contain more than eight pods.
Maximum of 8 Simple Actions per Clause. A Clause cannot contain more than eight Simple Actions.
Maximum of 10 replacement traces; restore
some before saving another. You can only replace ten original timing traces before an original must be restored.