Tektronix 5110, Инструкция по эксплуатации

Страница: 24 / 128

Specification and Performance Check-5110
Table 2-2
HORIZONTAL AMPLIFIER
Characteristics
Performance
Requirements
Supplemental
Information
Input Signal Amplitude
(Differential Input)
50 mV/displayed division.
Horizontal Centering 0.5 division or less.
Bandwidth De to at least 2 MHz
with a calibrated 5A18N.
X-Y Phase Difference
Between Vertical and
Horizontal
Compartments
1° or less to 100 kHz. Checked with two plug-ins
of the same type.
Signal Outputs (Option 7)
Right Out Signal Crt-related sweep signal
Derived from interface
signal output pins
Sensitivity 0.5 V/crt div, ±3% into >100 kΩ
Polarity and Output
Voltage
Positive-going ramp, >5 V
DC offset provided by
timebase position control
Output Impedance
Approximately 1 kΩ
Gate Out Signal Crt-related Z-axis signal
Selected by timebase
Output Levels
TTL compatible
Low: Sinking 1.6 mA, <0.4 V
High: Supplying 40 //A, >2.4 V
Risetime
<1 µs into <50 pF
Falltime
<200 ns into <50 pF
Table 2-3
Z-AXIS AMPLIFIER
Characteristics
Performance
Requirements
Supplemental
Information
External Intensity Input
Useful Input Voltage
+5 V will turn on display to
a normal brightness level
from an off level; — 5 V will
turn off display from a
normal brightness level.
Useable Frequency Range De to 1 MHz.
Input R and C
Approximately 10 kΩ,
paralleled by approximately
40 pF.
Maximum Safe Input
±50 V (de + peak ac).
Table 2-4
DISPLAY
Characteristics
Performance
Requirements
Supplemental
Information
Cathode-Ray Tube
Deflection
Electrostatic.
Phosphor
P31 standard; P7 or P11
optional.
2-2
REV A, NOV 1978